KPFM and EFM test sample
Alternating gold and aluminium lines with gaps


Introduction

The KPFM  & EFM test sample has been specifically designed to test the performance of Kelvin Probe Force Microscopy and Electrostatic Force Microscopy. This practical test sample consists of arrays with alternating aluminium and gold lines deposited on a silicon oxide covered silicon substrate. There are 4 line array pitches: 4, 8, 20 and 40 um with gaps of 0.5-0.8um between the lines. The line height is approx. 35 nm.


Features of the KPFM & EFM test sample:

  • Arrays with alternating Al en Au lines
  • Line array pitches of 4, 8, 20 and 40 um with a gap of 0.5-08um.
  • Line height is approx. 35nm
  • Stack is silicon chip on Ø12mm glass disc on Ø15mm metal disc with total height of 1.5mm
  • Thin copper wires connected to the Al and Au pads

Specifications of the KPFM & EFM test sample

Product number

34-033040

Line height

35 nm

Gap width

0.5 – 0.8 um

Line width

Group

Pitch

Aluminium

Gold

Large

40 um

10 ± 0.5 um

29 ± 0.5 um

Medium

20 um

5 ± 0.5 um

14 ± 0.5 um

Small

10 um

2 ± 0.5 um

6 ± 0.5 um

Extra small

4 um

1 ± 0.5 um

2 ± 0.5 um



Ordering Information for the KPFM & EFM test sample

*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
  
KPFM and EFM test sample with Al and Au line arrays, mounted on 15mm metal AFM disc KPFM and EFM test sample with Al and Au line arrays, mounted on 15mm metal AFM disc
Product # Unit Price* Add to Quote / Order
34-034040 each €580,00
Qty:

 



SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  Product Menu with Images
  SEM Sample Stubs
  Carbon Tabs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments / Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM Series Supplies
  Field & Lab Sampler Kits
  FlowView liquid sample Kit

Instruments

  Acoustic Enclosures
  Cressington SEM coaters
  TEM Sample Prep
  Diaphragm Pump
  Rotary vacuum Pump
  Precision diamond saw  
  TEM Grids
  TEM Support Films
  Silicon Nitride Films
  K-Kit Wet Cell Holder
  Graphene Films
  TEM Grid Boxes
  Cryo Grid Boxes
  TEM Sample Staining
  3mm Embedding Tubes
  Filaments/Cathodes
  Eyelash Manipulators

Cryo Supplies

  Cryo Grid Boxes
  Other Cryo Supplies

FIB Supplies

  FIB Lift-out Grids
  FIB Low Profile Stubs
  FIB Grid Holders
  FIB Pre-tilt Holders
  FIB Pre-tilt stubs
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies

  Vacuum Gauges
  KF/NW Vacuum Parts
  KF/NW Vacuum Hoses
  ISO Vacuum flange parts
  Vacuum Oil and Grease
  Vacuum Sealant
  Diaphragm Pump
  Rotary vacuum Pump
  Vacuum Sample Storage
  Vacuum Pick-Up Pens

Sample Coating Supplies

  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  SEM Sample Coating Fluid

Evaporation Supplies

  Thermal Evaporation Sources
  Evaporation Materials
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes & Tabs
  Non-Conductive Adhesives
  Sample Storage
  Hand Tools
  Sorting Wire Mesh
  Preparation Surfaces
  Cleaning / Gloves
  Conductive Metal Powders
  Metallographic Sample Prep
  AFM/SPM Discs
  AFM/SPM Disc Pick-up Tool
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Nano-Tec Mica Discs
  HOPG Substrates

Light Microscopy

  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black Metal Slides
  Slide Storage Boxes
  LM Calibration
  Plastic Transfer Pipettes
  Optical Lens Tissue
  Glass Petri Dishes
  Digital Microscope
  PTFE Beakers